top of page
Copy of How to Secure Vacant Home: Practical Steps

Copy of How to Secure Vacant Home: Practical Steps

Writer: Eli Laufer
Eli Laufer
Nov 3
6 min read

A vacant house can draw attention faster than most owners expect. Mail piling up, a dark entryway, an overgrown lawn, or a contractor key passed between people can signal that no one is watching. If you are searching for how to secure vacant home property, start with the basics that make unauthorized entry harder and make the home appear regularly cared for.

The right plan depends on why the home is empty and for how long. A property between tenants needs a different approach than a home awaiting probate, renovation, sale, or an owner’s extended travel. Still, the priorities remain the same: control access, repair weak points, create visible activity, and check the property consistently.

Start With the Locks and Keys

The first security question is simple: who may still have a key? Former tenants, relatives, cleaners, real estate agents, contractors, neighbors, or previous owners may have had access at some point. Even if every key was returned, you cannot know whether copies were made.

Rekeying the exterior locks is usually the practical first step when possession changes. A locksmith changes the lock’s internal pins so old keys no longer work, while the existing hardware can often remain in place if it is in good condition. This is often less costly than replacing every lock, and it gives the owner a clear starting point for key control.

Replacement makes more sense when the hardware is worn, damaged, mismatched, or not providing adequate protection. Check the deadbolt, latch, strike plate, door frame, hinges, and the screws holding each part in place. A strong deadbolt does not help much if the strike plate is loose or installed with short screws that barely reach the frame.

For many vacant homes, the main entry, side door, garage service door, and rear door deserve the closest attention. Sliding doors and doors leading from the garage into the house are also commonly overlooked. Make sure every exterior door closes fully and locks without forcing or lifting the door.

Keep key access limited and documented

Once locks are rekeyed or replaced, issue as few keys as possible. Property managers should keep a simple record of who receives each key and when it is returned. Avoid hiding a spare key under a mat, planter, fake rock, or exterior fixture. Those locations are familiar to anyone looking for easy access.

If contractors need entry during a renovation, consider scheduling access around specific work times instead of leaving an unrestricted key available. When work is complete, collect keys promptly. If a key cannot be accounted for, rekey the affected lock rather than hoping it was misplaced harmlessly.

Secure Windows, Garage Doors, and Secondary Entries

Burglars often look for the least protected opening, not necessarily the front door. Walk around the entire property during daylight and inspect every reachable window, basement opening, side gate, and garage entry. A vacant home should not have a window that is unlocked, cracked open for ventilation, or hidden behind overgrown shrubs.

Confirm that window latches engage correctly. Replace damaged locks and repair windows that do not close or stay shut. For accessible sliding windows and doors, a properly fitted track bar can add another obstacle to forced opening. Do not rely on a screen as security. Screens provide privacy and insect control, not meaningful resistance to entry.

The garage needs special attention because it can hide activity from the street and may provide access to the home. Lock the interior door between the garage and living space. If the property has an automatic garage opener, remove remotes from vehicles or unsecured places, and consider disconnecting the opener when regular access is not needed. A manual lock or other appropriate garage-door security measure may be useful depending on the door and how often authorized people need access.

Do not forget gates, sheds, and storage areas. Tools, ladders, and building materials can attract theft, but they can also help someone gain entry to the house. Remove ladders from the property when possible, or secure them inside a locked structure.

Make the Property Look Occupied

Security hardware matters, but visible neglect can advertise vacancy. A home that looks watched is generally a less appealing target than one that appears forgotten.

Use interior lights on timers in a few visible rooms. Choose varied on-and-off times rather than leaving one light burning day and night. Exterior lighting at the front door, driveway, side yard, and rear entry helps eliminate dark hiding places. Motion-activated lighting can be useful around less visible areas, though it should be aimed carefully so it does not shine into neighboring homes.

Keep the landscaping maintained. Mow the lawn, trim shrubs away from windows and walkways, remove flyers from the door, and arrange for trash bins to be taken in after collection day. In Folsom and nearby Sacramento-area neighborhoods, dry summer landscaping can also create fire concerns, so clear leaves and debris from around the property as part of routine upkeep.

Mail is another clear vacancy signal. Forward it, pause delivery when appropriate, or have a trusted person collect it regularly. Avoid posting public messages that announce a home is empty or reveal a lengthy travel schedule.

Use Cameras and Alarms With a Real Response Plan

A security camera can deter unwanted activity and provide useful information after an incident, but it is not a substitute for locks, inspections, and a response plan. Place cameras where they can cover exterior approaches, driveway activity, and entry doors without invading a neighbor’s privacy. Check that they have power, a reliable connection, and adequate nighttime visibility.

Monitored alarms can add protection, particularly for a longer vacancy or a home containing valuable materials. But an alarm is only as useful as the contact information and response instructions behind it. Keep the monitoring company updated with the owner’s number, property manager, and an authorized local contact who can respond if needed.

Smart locks can be helpful when several approved people need temporary access, but they are not always the best answer. They require battery checks, reliable setup, and disciplined management of user codes. For a simple short-term vacancy, professionally rekeyed mechanical locks with limited key distribution may be easier to manage. For a renovation with changing contractors, managed codes may offer better accountability. The best choice depends on who needs access and how often.

Inspect the Home on a Set Schedule

A vacant home should never be left without regular in-person checks. Remote cameras may show an entryway, but they cannot reliably identify a leaking water heater, a tripped breaker, pest activity, a broken window on the side of the house, or damage after a storm.

Set an inspection schedule based on the property’s condition, season, and vacancy length. A home undergoing work may need checks several times each week. A secured, empty home may still need a weekly walkthrough. During each visit, inspect doors and windows for signs of tampering, test visible locks, look for water leaks or unusual odors, check for mail and notices, and verify that lights and security equipment are operating.

Document each visit with a brief date-stamped note and photos when appropriate. This creates a clear record for owners, insurers, and property managers. It also helps spot small changes before they become expensive repairs.

Check insurance requirements before leaving the property empty

Vacancy can affect insurance coverage. Some policies have special conditions once a home has been unoccupied for a certain period, especially regarding vandalism, theft, water damage, or freezing-related losses. Contact the insurer before a long vacancy begins and ask what inspections, utility settings, or security measures are required.

This is not just paperwork. A properly secured home can still create a difficult claim if the policy’s vacancy conditions were not met. Keep records of inspections, maintenance, and any security upgrades.

Choose Qualified Help for Lock Work

When a lock needs rekeying, repair, or replacement, use a locksmith whose credentials you can verify. California consumers can verify locksmith licensing through the Bureau of Security and Investigative Services. That step helps protect you from unreliable operators, unclear pricing, and work that leaves the property less secure than before.

A qualified local locksmith can assess whether your current hardware is worth rekeying, identify damaged door hardware, and help establish a manageable key plan. For Folsom property owners and managers, OutLock Locksmith provides residential rekeying, lock repair, and lock replacement with a focus on professionalism, excellence, and timeliness.

Vacant-home security is not one purchase or one lock change. It is a routine of controlled access, maintained hardware, visible care, and regular checks. Put that routine in place before the house looks empty, not after someone has tested its weak points.

 
 
 

Recent Posts

See All

Comments


(916) 225-4609

©2019 by OutLock Locksmith. Proudly created with Wix.com

bottom of page